3T Exploro Team Carbon Frame

Exploro is a bike frame built for speed and comfort on roads and trails beyond the reach of regular road bikes. It has clearance for big tires to conquer any surface, coupled with aerodynamic shapes that work at real speeds under real conditions, both on- and off-road.

Road, cross, and MTB tires can all be fitted: 700c road or cross tires are close in diameter to 650b GravelPlus® tires. Switching to 650b wheels for wider tire sizes enables the frame to have compact, race-bred geometry and a short rear end, for agile steering and phenomenal grip on loose dirt as well as blacktop. Recommended wheels are 3T Discus for 700c, and 3T DiscusPlus for 650b.

Exploro's Sqaero® shapes are structurally efficient and offer RealFast™ aerodynamics — even when covered in mud . Exploro uses Sqaero 50/25, with a 50 mm wide downtube that picks up the airflow coming off a wider cross or MTB front tire and leads it on to the water bottles. The seat-tube is 25 mm wide to make it aerodynamically ‘disappear’ between the bottles and the rear tire. Headtube, seatstays, and custom seatpost also use Sqaero shapes. Exploro on 40 mm knobby cyclocross tires is faster than the equivalent round-tube bike on 28 mm slicks — enough to make all the difference on a long, grueling ride on gravel roads.

Exploro fits single and double cranksets and its ‘dropped’ chainstay on the driveside ensures there are no clearance issues. Swapping wheels, or fixing a flat on the trail, couldn’t be easier, thanks to the Out-of-the-Way™ rear mech hanger that detaches from the frame when rear wheel is removed, taking the rear mech and chain out of the way. Thru axle makes re-fitting a snap. Specifications:

Features:

• Fork: 3T Luteus II TEAM
• Chainring fit:*
• Max inner ring - 36T
• Max outer ring - 50T
• Max single ring (offset ring) - 46T
• Max single ring (flat ring) - 50T
• Headset: Integrated tapered IS42/28.6|IS52/40
• Seatpost: 3T Charlie Sqaero
• Rear axle: 142x12mm thru axle
• Rear Brake: Post mount for 160mm disc
• Cable Routing: Internal via interchangeable FlipTop covers for 1x10/11, 2x10/11, Di2, eTap
• Bag mount: 100mm front-post-to-bearing-bore-edge
• Inc.in box: frame, fork, seatpost, seatpost internal clamp, headset, front thru axle, 1 front and 2 rear derailleur hangers, front derailleur cable liner, noise-cancelling foam sleeve for rear derailleur housing and brake hose.
• Weight: 1150g

*Applies to round rings, oval rings come in varoius shapes and need to be measured individually.