Subtotal: ( items in your basket)
Usually dispatched within 24 hours
Average connection time 25 secs
Carbon fiber is composed of extremely thin, bonded fiber made of carbon atoms. Thousands of carbon fibers are bundled together into cloth-like sheets. The sheets are combined with plastic resin. The sheets are placed into a mold with the fibers oriented in specific directions to create the desired characteristics of strength, stiffness or flexibility for the completed rim. Carbon fiber is used in wheels because of the high strength-to-weight ratio, low weight and the ability to mold the sheets into aerodynamic shapes. The subject of intense study in cycling, aerodynamics is the air flow over and around your wheels, bike and body as you ride. The goal of aerodynamics is to reduce the wind resistance called drag on your equipment, so the rider slices through the air and goes faster. At slow speeds, there is smooth air flow called laminar flow. As speed increases, the laminar flow turns to turbulent flow. There is a “sweet spot,” the point of reduced drag, when the air begins to tumble over and across the wheel surfaces in turbulent flow. The key to top carbon fiber wheel design is to produce rim shapes that optimize, capture and maintain the aerodynamic sweet spot for each rim depth.
Bill Shook started the engineering process on our carbon fiber rims from the inside, dictating the direction and lay up of the fibers to form stronger internal spoke beds for structural integrity and stiffness. He then moved to the outside of each wheel, designing unique features for aerodynamic performance to achieve the “sweet spot”. Carbon 38, Carbon 44 and Carbon 50 are the most challenging shapes because of their minimal surface area. Bill designed a gentle curved shape down to the spoke bed to minimizing drag by bringing the air flow back together without turbulence. Carbon 58 tubulars and clinchers have a recurve shape under the brake track. The recurve shape creates air pressure fluctuations causing a ripple effect to induce turbulent air flow to reduce drag at higher speeds. Carbon 85 tubulars are a semi disk shape with no spokes near the leading edge of the wheel. Bill designed the large, smooth carbon surface bringing air back together reducing cavitation behind the spokes. Carbon TT Disk is the ultimate in aerodynamics with lenticular skins to sustain the sweet spot for maximized power output.
Please check the stock availability notice on your item when placing your order. This item is: In stock.
Express Delivery Available If ordered before 8pm, delivered by courier next working day. Available on orders placed before 8pm (2pm weekends and Bank Holidays) for delivery next business day. Applies to most delivery addresses within mainland UK.
You will receive an email to confirm when your item has been sent.
You can also check the status of your order and individual items by accessing your account details and following the prompts.
Please allow 10 working days from the shipping date of your order before notifying us of any late deliveries.
It may be advisable to check with your neighbors to see if your delivery has been left with them, check any places it could be left such as: garage, porch, or behind garbage cans if it was too big to fit through your mailbox. Contact your local post office to see if the item has been returned to the depot as undelivered and awaiting collection.
Please see our returns policy.
Where reviews refer to foods or cosmetic products, results may vary from person to person. Customer reviews are independent and do not represent the views of The Hut Group.
Bought this wheels set in May 2016. After 18 months, the rear wheel brake track has worn on the drive side only. Sent pictures to Manufacture to determine if this was a defect. Have not heard from them since! The wheelset performed great. Really like them however, consider this: you may not get good customer service if an issue arises. I since Bought the Reynolds Assaults and I'm very happy with them so far.