Average connection time 25 secs
Average connection time 25 secs
Experience lightness at the helm. The famous Superleggera handlebar in the new exclusive Limited Edition RS finish. Made from HR40 Carbon Fibre and a special resin that allows Deda to create a very compact composite, shaving off every excess gram of weight. This, combined with the new Superleggero RS stem results in an unbeatable weight.
- Shape: RHM (Rapid Hand Movement)
- Material: Carbon HR40
- Diameter: 31.7mm
- Reach: 75mm
- Drop: 130mm
- Weight: 180g (42cm)
How long will it take to arrive?
Please check the stock availability notice on your item when placing your order. This item is: In stock
Express Delivery Available If ordered before 8pm, delivered by courier next working day. Available on orders placed before 8pm (2pm weekends and Bank Holidays) for delivery next business day. Applies to most delivery addresses within mainland UK.
How will I know it has been sent
You will receive an email to confirm when your item has been sent.
You can also check the status of your order and individual items by accessing your account details and following the prompts.
Please allow 10 working days from the shipping date of your order before notifying us of any late deliveries.
It may be advisable to check with your neighbors to see if your delivery has been left with them, check any places it could be left such as: garage, porch, or behind garbage cans if it was too big to fit through your mailbox. Contact your local post office to see if the item has been returned to the depot as undelivered and awaiting collection.
If I'm not completely happy with my item?
Please see our returns policy.
Top Customer Reviews
Where reviews refer to foods or cosmetic products, results may vary from person to person. Customer reviews are independent and do not represent the views of The Hut Group.
Very satisfied with the bars, very strong and lightweight!
"Comfortable Shape, Lightweight and Fits Campagnolo V4 EPS Controls"
Chose the Deda Superleggero RS bar because these are one of the only handlebars available that can accomodate the Campagnolo EPS V4 internal bar end control unit and wiring, (Campag owns Deda Elementi). This bar also has an excellent shape in the drops with a longer flat area than 3T bars and a short reach at the hoods, which I find very comfortable. Also very important, the mounting location for the controls is high enough up to mount Campagnolo levers in the correct position and keep the top of the bars flat or slightly canted down, which I prefer. On the negative, these bars are thin wall and you have to be very careful with bolt torque, where Deda should add more strength in the clamping areas, instead of concentrating on minimum weight. Even with the lightweight, this bar is surprisingly stiff and you shouldn't have problems with bar flex. Overall, an excellent, comfortable handlebar.
i bought this for my daccordi Divo fram, and built with Shimano ultegra DI2 set, this handle bar has a internal cable routing and hole for bar end junction. so i perfectly set cable and levers nicely.
The bars to get
If you want a light and stiff carbon set of bars then these are the ones. Subtle and stealth graphics on top match nicely with the UD matte carbon weave finish of the bars. Hoods are a nice ovalised shape that you can still take a fist full of riding on the tops on climbs. Drops have the nice and normal deda anatomic shape. The drops don't flare out much at the bottom, which is noticeable with shimano (ultegra Di2) shifters which result in your brake levers angling outwards where the drops are more vertical. This isn't as noticeable with Campy (Chorus) levers which are more vertical in line with the bars. However, when riding this isn't a problem and is mainly to do with the shape of Shimano brake levers, where I mainly noticed the difference. They have excellent cable routing holes near the steam which exit just behind where the shifters will mount (on the bottom side of the bars). It is easy to push through brake cables/hoses and Di2 cables and there is enough room for mech cables instead. I was balancing out buying these or the superzero carbon bars, which are more aero on top. I'm glad I went this way as I like riding on the tops for climbing and not having an as comfortable hand hold on the tops (with no bar tape) pushed me towards the superleggera handlebars. These are measured outside to outside. So if you want 42cm c-c then buy the 44cm.