AbsoluteBLACK Bolt Covers and Bolts

Absoluteblack premium bolt covers are designed specifically for Shimano 110/4bcd Ultegra 8000 and Dura-Ace 9100 cranks. They cover the small step down between chainring and crank arms, completing the entire look of the crank. With these covers your crank looks great again.

In the box:

• 4 covers
• 4x T30 torx bolts

Specifications:

• Mass/Size: 13g
• Color: Black, Ultegra Grey
• Compatibility: Dura-Ace 9100, 9150 Di2, Ultegra 8000, R8050 Di2. (also fit nicely with Rotor chainrings)
• Material: 7075 T6 aluminium
• Finish: type II anodizing

Bolt covers are delivered with the mounting bolts.(no extra bolts needed)

Simply put, these bolt covers for Ultegra and DuraAce cranks make your crank look even better with AbsoluteBlack or Rotor Oval chainrings. When you switch to Absoluteblack oval rings, you create a small step down at the connection point between crank arms and chainring bolt hole area.These bolt covers fix this making your crank look great again.

There are two separate versions. One fits Ultegra 8000 and the other one Dura-Ace 9100.

How to mount absoluteBLACK bolt covers:

Remove your current bolts and nuts completely. Place the bolt covers into their specific positions from the front, so they sit nice and flush with crank. Then use provided short bolts with torx T30 sockets and screw them from the back. You should use about 5-7Nm of force.

IMPORTANT!While tightening the provided bolts to the recommended torque, it is necessary to prevent the bolt covers from spinning, by holding them down with your fingers. If the covers are not held while torqueing the bolts, they might get damaged.