Nokon Brake or Gear Cable Outer System

$65.57

RRP $87.43 Save 25% = $21.86
Option Stock Price Quantity
Gold
In Stock

$65.57

RRP $87.43 Save 25% = $21.86
Green
In Stock

$65.57

RRP $87.43 Save 25% = $21.86
Nokon
Nokon
Imagination becomes reality'. Nokon are the cable and housing system for the 21st century. It is the patented bicycle cable and housing system that is designed to provide the most flexible braking and accurate shifting ever achieved.

Hover to Zoom

or click to enlarge

Product Overview

Fast shifting - precise braking. This boxed set contains inner gear cables (x2) and inner brake cables (x2) and enough dual use outer cabling for one complete application (gear or brake). Works with all hidden cabled shift/brake units. Please note if you wish to upgrade both gear and brake cables you require two sets.

Key Features:

  • Now works with all Road bikes for gears or brakes with one kit (SRAM, Shimano and Campag).
  • Doubly ingenious for the highest precision whether changing gear or braking.
  • Increased safety and precision even if bent or if used in extreme situations.
  • 40 percent weight saving compared with normal Bowden cables.
  • The pressure-stable outer sheath prevents the inner cable from stretching, thus avoiding the associated gearing problems.
  • For big frames or brake cables which runs through the frame Nokon recommend the Cable Extension Kit.
  • Please use original spare parts in case of replacement to guarantee best function.
  • Outer length: 1m of all colours anodised aluminium except white which is powder coated aluminium outer cable.
  • This cable system includes 1m of anodised aluminium outer (this does not include end caps, extra beads and end coils which make the outer up to 1.5m according to Nokon), 2 x1.5m of the black 'sheath' outer (this goes inside the aluminium outers and houses the cable) and 2 x inner gear cables and 2 x inner brake cables.
  • Made in Germany.

Item Code: 100325

Product Reviews

Customer Reviews

expensive, but amazing shifting and routing - Review by Andrew

I have these on my tri bike, and the shifting is fantastic. The cables are a pain to put together the first time, but after that, replacing cables through the frame and through the aerobars is a breeze. Cables are very lightweight, and are very flexible, which is good for tight bends through the aerobars. Small downsides are the noise they make on the inside of the frame, and the potential for rubbing on the external of the frame. Make sure to treat the exterior cable with rust off to avoid cable degradation.

(Posted on 16/11/2011)

Worth the time and money - Review by Troy

Yes these are expensive cables, and yes they do take more time to setup, but they are still worth it. You get far more adjustability with these when routing the cables. I stupidly pinched my cable under the clamp of my clip on aero bars a half hour before a time trial. I could not shift gears and if I had been using regular cables there wouldn't have been much I could do. With these I used a pair of pliers to break the two pinched pieces off, adjusted the cable tension and I was fine. I even had a PB time for the course. When I got home I just pulled the cable off and replaced the two pieces with some spares I had and everything was good to go!
The only reason I'm not giving these a five is due to the creaking noise they make. If the cables are fairly tight the pieces that make up the outer cable creak slightly. Although I have found using a little oil on them mostly clears that up.

(Posted on 10/04/2011)

great cable system but expensive! - Review by duzza

needed to replace cables so thought i would try this system and glad i did. they look fantastic and so far have worked flawlessly although i haven't got them wet yet. i have only given them four stars because of the price and also they are a bit more time consuming to fit than normal cables but i thought they were going to be harder to fit than they actually were. will also add that the instructions are absolutely terrible!

(Posted on 05/04/2011)