Decals for your speed weaponry. Your Zipp wheels or rims will last a lifetime, but the decals might not. When it's time for a new set, select the right size, install, and your wheels will look fresh and as good as new.
Decal Application: Peel or gently scrap off all parts of the old decal. Clean the rim well with soap and water and then use rubbing alcohol or acetone to remove any residual grime and grease. Slowly peal the backing off the decal, position the new decal over the rim and apply staring at one end. Work the air bubbles from the centre towards the outside. Use a squeegee applicator to work the decal into the dimples.
Decal Removal: If your decals are adhesive and not moulded in, you can use a hair dryer to soften the glue, grab a corner and gently pull off, scrape the remainder off with your nails or a blunt popsicle stick, clean well with acetone or white spirits, allow to evaporate and apply the new decals. If the original decals are moulded in, (use the thumbnail test to feel for an edge) you will have to purchase a set of decals and apply them over the top. Moulded in decals cannot be removed without structural damage to the rim.
You will receive an email to confirm when your item has been sent.
Please allow 10 working days from dispatch of your order before notifying us of any late deliveries.
Please see our returns policy.
There are currently no reviews.